2013 maintenance electrician personal work summary - Solutions - Huaqiang Electronic Network

Single chip microcomputer STM32L151CCU6

SMD aluminum electrolytic capacitor

Three hundred and sixty lines, the line is the champion." For me who is not good at learning from a young age, it is very difficult to get into college, but I still have no disappointment. I realize my own. After the situation, I graduated from the junior high school and went to the technical school to study a technology that suits my own. After I carefully considered it, I decided to study electrician. I hope I can become a good electrician. After I graduated. I studied very well and then came to work in the factory. Since I worked, I have been working in frontline electricians. Over the years, I have strictly demanded myself and worked hard. I mainly summarize the following aspects: I. Ideological and political learning and democratic management In terms of aspects, I have carefully studied Marxism-Leninism, Mao Zedong Thought, and Deng Xiaoping Theory, and guided the production practice with the spirit of the three representatives. Actively participated in various democratic activities, participated in democratic management, took the factory as the home, worked hard, and worked as a production lineman. Responsibilities to be done. Second, in terms of energy conservation and consumption reduction, I actively use what I have learned. Knowledge has contributed a lot to the energy saving and consumption reduction of the factory. For the transformation of the factory line, the factory saves more than 10,000 kWh of electricity every year. At the same time, it also carries out electrical transformation on the old equipment of the factory, so that some old equipment can be rebuilt. Rejuvenation. Third, practice production aspects in production practice, such as: electric motor fault finding and troubleshooting examples. Electrical aspects: 1, check the insulation of the lead wire is intact, the motor is overheated, check whether the wiring meets the nameplate regulations, winding Whether the first and last terminals are correct; 2. Measure the insulation resistance and DC resistance to check whether the insulation is damaged. Is there any open circuit, short circuit and grounding in the windings; 3. When the power check is found at the end of the above inspection, it can be directly Power-on test, start with a lower voltage with a three-phase voltage regulator, and then gradually rise to the rated voltage, etc. Use the above inspection method to find faults for multiple motors in the factory, and IV. Safety production 1. Implement the superior documents Spirit, improve employees' awareness of safe use of electricity, and enhance employee responsibility.
2. Implement and improve the safety power organization system and improve the safety management rules and regulations.
3. Strengthen the safety management of the team's electricity consumption and consolidate the safety foundation.
4. One ensures that the consumers need to ensure their own safety and the safety of others. V. Training and learning In the past two years, I have actively participated in various learning and training, and worked hard to learn basic knowledge of electrician knowledge, power supply system knowledge, line devices, lighting devices, grounding devices, operation and maintenance of transformers, motor repair and maintenance, machine tools. Electrical control lines, plc control and other related knowledge systems. Every time I study, I have learned some new theories and used them to guide my work practice and apply them to my work. I have improved the power supply system and control system of the factory and received consistent praise. It is repaired. Timely summary of various fault phenomena and solutions, and documented, used to guide practice, but also improve their business level. In the production practice, we must implement the rules and regulations on the wall and strictly follow the rules and regulations. In the past two years, there has been no electrical safety failure caused by electricity in the factory, and the factory has undergone many technical transformations to make the equipment operation more scientific and rational. In the future work, I will always pay attention to my seriousness. Of course, as an electrician, safety is always the most important. Responsibility for the individual in safe production is also responsible for the factory. In the new year, I will continue to improve myself, and make more progress in thinking, technology, and work. I firmly believe that I will do better!