The turbine flow meter is a precision flow meter that can be used to measure the flow and total amount of liquid in conjunction with the corresponding flow meter. It is widely used in the measurement and control systems in the fields of petroleum, chemical, metallurgy and scientific research. Turbine flow sensors equipped with sanitary joints can be used in the pharmaceutical, food and other industries.
The intelligent integrated turbine flowmeter is an explosion-proof design that displays total flow, instantaneous flow and full flow percentage. The battery uses a long-lasting lithium battery. The battery life of the single-function integrated meter can reach more than 5 years, and the battery life of the multi-function display meter can reach more than 12 months.
The intelligent integrated meter can display a large number of flow units, including cubic meters, gallons, liters, standard cubic meters, standard liters, etc. It can set fixed pressure and temperature parameters to compensate for gas, and has little change to pressure and temperature parameters. In this case, the flow meter can be used for fixed compensation integration.
The maintenance of the turbine flowmeter sensor section should pay attention to the following points:
1. When using, keep the measured medium clean and free of impurities such as fibers and particles.
2. When the turbine flow sensor starts to use, it should first slowly fill the sensor with the medium, then open the outlet valve (the valve should be installed at the back end of the flowmeter). It is forbidden to be impacted by the high-speed fluid when the sensor is in the mediumless state.
3. The maintenance period of the turbine flow sensor is generally half a year. When cleaning and cleaning, please be careful not to damage the parts inside the measuring chamber, especially the impeller. Please be optimistic about the positional relationship between the guide and the impeller during assembly.
4. When the turbine flow sensor is not in use, the internal medium should be cleaned, and after drying, a protective cover is added at both ends of the sensor to prevent dust from entering, and then stored in a dry place.
5. The used filter should be cleaned regularly. When not in use, the internal medium should be cleaned. As with the sensor, add a dust jacket and store it in a dry place.
6. Before the sensor is installed, use the mouth to blow or hand the impeller to make it rotate quickly to see if there is any display. Install the sensor when there is any display. If there is no display, check the relevant parts and troubleshoot.
R and M Max 1700 Puffs is a perfect alternative for the traditional cigarette. It comes 6ml pre-filled with the e-liquid and fully charged battery of 1100mah, so customer can start using it straight away. This saves them time and effort. It's a Draw-Activated Firing Mechanism and these pods will deliver a soothing head change and a perfect fit for everyone, which gurantte you finish the last drop of the ejuice. Like the other Disposable Vape, RandM Max include vape tank, atomiser, battery and oil. The animation design makes it the coolest disposable device. We have all Puff Bar Plus flavors. There are 16 flavors for you to choose plus the adjustable airflow on the Market. such as Cola ice, mixed berries, aloe grape, banana ice etc. As a professional disposable vape randm max 1700 factory and supplier, we supply you real RandM Vape with security code, oem order is welcome.
RandM Max,RandM Max 1700, RandM Max Disposable, RandM Disposable Vape
Shenzhen Kate Technology Co., Ltd. , https://www.katevape.com