Many people don't know how to set the specific position of the monitor, which makes the device not fully utilized. So how should I place the monitor speakers?
Near field monitors are usually placed on a stand or table. If the near field monitor is placed on a shelf or table, you should use elastic material to isolate the speaker from the shelf or table to prevent the vibration of the speaker from being transmitted to the shelf or table.
The midfield speaker can be placed on the shelf or buried in the wall. Of course, near-field speakers are also available.
Far-field monitor speakers are usually buried in the soundproof wall. This allows the sound engineer to obtain the most accurate sound ground without interference from the reflected sound.
However, it should be noted that the general embedded speakers are passive speakers, so there is no problem of heating after the embedded speakers. Under normal circumstances, the active speakers are not embedded in the wall. If they are to be embedded, ventilation and heat dissipation are required.
1. The correct angle of installation angle and height is: the two speakers are facing the sound engineer's ear and form an equilateral triangle with the sound engineer's head.
2, the distance from the monitor speakers is far from the human head, there is a certain degree of attention, but not strict.
Near-field monitor speakers are generally suitable for 1-2 meters from the head of the human head. The mid-field monitor speakers can be placed at 2-4 meters. The main monitor can be placed 3-6 meters.
3. Other precautions Pay special attention to prevent the desktop or the mixer from being called a reflection source, which affects the quality of our monitoring. Also pay attention to the speaker in the direction suggested by the manufacturer, do not think that it is self-assertion.
4, horizontal or vertical there is a saying that the speaker is placed horizontally, the sound will be better. This kind of mastery is unfounded. Although the near-field monitors in many studios and studio photos in this tutorial are horizontal, this does not mean that we believe their approach is correct.
So should the speakers be placed horizontally or vertically? Manufacturers have the most say, scientific experiments show that the two units of the speaker, vertical placement is better than horizontal.
First of all, placing the speakers vertically will increase the distance and angle from the mixer table, reduce the sound of the speakers reflected by the mixer's countertops, and reduce the "comb filtering" effect caused by this reflection. . This is a scientific experiment that can be proved. Secondly, any speaker composed of multiple units has a problem: if the two units transmit different sounds at the same frequency of the human ear, they will cancel each other out after the superposition, and even cancel out when the phase is opposite. From the perspective of the frequency response curve, there is a gap in the middle. So we have to keep the distance between the two units and the human ear. And we know that the head of the recording is moving horizontally at work, but it is rarely moved longitudinally. Therefore, placing the speaker vertically can keep the distance between the two units and the sound engineer the same, regardless of whether the sound engineer is in the middle. Position, this will avoid this shortcoming of the speaker.
Rack Lifeo4 Battery Module,Rack Mounted Battery,Lifeo4 Battery Module,Solar System Mounted Rack Battery
Easun Power Technology Corp Limited , https://www.epinverter.com