Recently, Vishay announced the launch of a new white light, non-scattering 3mm LED, the VLHW4100, which is optimized for high-end applications to meet the application's requirements for extremely high luminous intensity. The VLHW4100 uses super bright InGaN technology and has a luminous intensity of 4500 mcd to 11250 mcd at 20 mA. The LED released today uses an impurity-free, colorless plastic housing and lens with a viewing angle of ±22.5° and high light output and visibility. With its high luminous intensity, the VLHW4100 can replace incandescent lamps and is ready to go into a variety of general and custom applications, including indoor and outdoor lighting, outdoor LED panels, light signage, and instrumentation and front panel lights.
The device's thermal resistance is as low as 400K/W and its power dissipation is as high as 95mW. The half-light viewing angle of the device is ±22.5°. According to the light emitting conditions, the luminous intensity and color of the devices in each package are consistent. The LED can withstand ESD voltage of 2kV, conforms to the JESD22-A114-B specification and complies with RoHS Directive 2002/95/EC.
Samples of the new VLHW4100 LED are available now and are in volume production. The lead time for large orders is eight weeks.
·Basic precautions
Do not put expensive oil into low-quality cartridges to avoid wastage. Most pre-filled oil cartridges have the so-called 510 thread. The oil cartridge screws onto a rechargeable battery. Some of these batteries have buttons and some heat up automatically when you pump the oil. Some batteries have multiple temperature settings and some heat up to a preset temperature; these features need to be known in advance.
·Cleaning notes
Use a suitable cleaning tool to clean them, such as activated charcoal or dried tea leaves in a used pipe to absorb the oil. It is important not to use alcohol or other boiling water to clean the pipe, and to wait until it has cooled down completely before cleaning. Otherwise, the hot stem will come into contact with the watery liquid and cause the mouthpiece tenon to loosen, thus shortening the life of the 510 cartridges.
This is what you should be aware of when using 510 cartridges. At the same time, when using 510 cartridges, there are still some vaping tips, for example, when using them, be careful not to suck too hard, will not produce smoke. When you inhale too hard, the smoke is sucked directly into your mouth and not atomized by the atomizer, so gently inhaling is more powerful and gives you a better vaping experience.
510 Cartridge Oem,Leakproof 510 Cartridge,510 Battery And Cartridges Oem,510 Cartridge
Shenzhen MASON VAP Technology Co., Ltd. , https://www.cbdvapefactory.com