Product Feature
1.With Pull in& out type Socket for easy wiring.
2.With AC/DC 12-30V Power Input.
3.Warning Alarm will be sent when eye sensor has problems.
Â
Consideration
>Single Beam must be connected into Group A (White Socket). Double beam
must be connected into Group A&B (Both White and Black Socket)
>The eye installation hole should be 13mm.Â
>Single beam installation height:60cm from ground.Double beam installation height: One beam should be 30cm from  ground. The Other should be 90cm from ground.
>The eyes installation should be vertical and horizontal level. Keep away from sundries to avoid error action.
>Pls keep away from tree and flower to avoid error action
>Pls make sure the installation height should be at least 20cm from ground.
Parameters
| Supply power:                 | AC/DC12∽30V |
| Static current | 12V-18mA |
| Action current | 12V-58mA |
| maximum transmit distance | 10meters |
| NO or NC contact | both |
| Beam | single beam or double beam |
| Working Environment temperature |  -42ºC∽45ºC |
| Working environment humidity | 10-90%RH |
| Appearance dimensions(controller) | 105.5(L)×53.4(W)×28.5(H)mm |
| Appearance dimensions( eye) | 19(L)×13(D)mm |
Â
Fiber Optic Patch Panel, Termination Box Fiber Optic Termination Box/Patch Panel(OTB)designed according to the standard 19-inch cabinet, it is made of cold rolled steel of high grade and welded in its entirety with goods appearance, cabel can enter from the left or right side . Fiber Optic Termination Box/Patch Panel(OTB) perform fiber splicing, distribution, termination, patching, storage and management in one unit. They support both cross-connect and interconnect architecture, and provide interfaces between outside plant cables and transmission equipment.
Fiber Optic Patch Panel
Fiber Optic Patch Panel,Fiber Optic Distribution Panel,Fiber Optical Patch Panel
Sijee Optical Communication Technology Co.,Ltd , http://www.sijee-optical.com