GB/T 24825—2009 Performance requirements for DC or AC electronic control devices for LED modules

Foreword

This standard is modified to adopt IEC62384:2006 "Performance Requirements for DC or AC Electronic Control Devices for LED Modules".
The main differences between this standard and IEC62384:2006 are as follows:

a) Replace the "," as a decimal point with a decimal point ".";

b) the words “this International Standard” are replaced by the words “this Standard”;

c) remove the preamble to international standards;

d) For the other international standards cited in IEC62384, which are equivalent to adopt the Chinese standard, this part replaces the corresponding international standards with these national standards or industry standards cited in China, and the rest does not have the same international standards as China's standards. Directly quoted in this section;

e) Added Chapter 14, “Energy Efficiency Ratings”.

Appendix A and Appendix B of this standard are normative appendices.

This standard was proposed by the China National Light Industry Council.

This standard is under the jurisdiction of the National Lighting Appliance Standardization Technical Committee (SAC/TC224).

This standard was drafted: National Electric Light Source Quality Supervision and Inspection Center (Shanghai), Foshan Huaquan Electric Lighting Co., Ltd., Guangzhou Zhongde Electric Control Co., Ltd., Shenzhen Haohao High-tech Development Co., Ltd., Guangdong Mingjia Technology Co., Ltd. Company, Shanghai Yaming Bulb Factory Co., Ltd., Zhongshan Oupu Lighting Co., Ltd., Tongxiang Shenghui Lighting Appliance Co., Ltd., Zhongshan Huayi Lighting Co., Ltd.
Shenghui Lighting Appliance (Zhejiang) Co., Ltd., Honeywell Langeng Electrical System Technology (Guangdong) Co., Ltd., Nanjing Handerson Technology Co., Ltd.

The main drafters of this standard: Yang Lan, Yu Anqi, District Zhi Yang, Ma Guomin, Li Mingyuan, Wang Ping, Xu Xiaoliang, Zhou Mingxing, Shen Jinxiang, Peng Zhaofu, Fu Baocheng, Zhou Ming, Ke Baiquan, Li Weisheng.

For details, please click to download: http://bbs.lightingchina.com/dispbbs_18_19175_1_1.html

Miner Accessories

Immersion Cooling is a technique used to cool components of IT equipment that consists of submerging the computer components in a thermally conductive and dielectric liquid. Through this practice, the servers are cooled and heat is transferred from the source to the liquid.

When we talk about Immersion Cooling, we also need to discuss the different types of Immersion Cooling, as well as the applications of Immersion cooling. The practice of Immersion Cooling has a multitude of benefits particularly as it allows datacenters to be managed in a greener and more sustainable manner. Environmental concerns has been a huge catalyst for the adoption of the technology in recent years.

With Immersion Cooling the heat is transferred directly from the heat source to the working fluid. In [watercooling" the working fluid is potentially harmful to electronics and thus flows through a sealed loop isolated from the heat source. A watertight waterblock is used to indirectly transfer the heat from the heat source to the working fluid. With Immersion Cooling the working fluid must be non-conductive and that generally limits us to four families of fluids:

deionized water
mineral oil
fluorocarbon-based fluids
synthetic
Immersion Cooling systems used to have a higher fluid cost than water cooling, but this is already changing.

A wide variety of liquids exist for this purpose, the most suitable being transformer oils and other electrical cooling oils. Non-purpose oils, including cooking, motor and silicone oils, have been successfully used for cooling personal computers

water cooling,oil cooling,immersion cooling box,liquid immersion cooling,apw12 power supply

Shenzhen YLHM Technology Co., Ltd. , https://www.hkcryptominer.com