Daqing promotes green lighting project with remarkable results

Since 2002, the city has saved nearly 8 million yuan by relying on "green lighting", and has truly reduced energy conservation and emission reduction.
In 2002, the city began to implement energy-efficient LED light sources in urban lighting landscape facilities.
This kind of light source not only has high brightness, but also has very low light consumption. The power is only one-thirtieth of that of ordinary light source. The annual power saving is several times that of ordinary light source, and it can prevent light pollution and light interference. It is “green lighting”. new force.
In 2003, the city also cited the microcomputer intelligent monitoring system of Nanjing University of Science and Technology, which was used in street lighting, centralized monitoring and time-sharing of urban lighting, adjusting the switching time according to seasonal characteristics, and saving electricity. 20%, this alone can save more than 800,000 yuan in electricity costs per year.
In 2005, the city installed lighting power saver on the expressway and Dahao Hotel switchboard. The power saving rate of this street lighting power saver was 21%.
In 2006, the city installed energy-saving equipment on 60 street lamp control cabinets directly under the city, saving more than 1.2 million yuan in electricity every year.
In that year, some solar garden lights were installed in the Binzhou Lake lighting project, saving more than 70,000 yuan in electricity every year.
In 2007, 48 solar lights were installed in the Dongfeng bubble lighting project, saving 17,000 yuan in electricity every year.
In the past five years, “green lighting” has been nearly 8 million yuan for Daqing.
In July of this year, the city also formulated the “Special Implementation Plan for Green Lighting”, striving to increase the application rate of solar lamps from 5% in 2006 to 35% in the next four years, and 80% of energy-efficient light sources to 100%. %, let "green lighting" for Daqing province more money.

(Source: Daqing Net)

Three Phase A/V Transducer

Three-phase current and voltage transducers are mainly used to isolate the measured
current and voltage signals and output one or two analog signals or digital signals.

Three Phase A/V Transducer,Three Phase Current Transducer,Three-Phase Ac/Dc Instrument Transducer,3 Phase Voltage Transducer

Jiangsu Sfere Electric Co., Ltd , https://www.elecnova-global.com

This entry was posted in on