One type of valve, and the flange gate valve are of a type, the closing member is a sphere, and the ball rotates around the center line of the valve body to open and close. The ball valve is mainly used in the pipeline to cut, distribute and change the flow direction of the medium. General level installation.
advantage
1. The fluid resistance is small, and its resistance coefficient is equal to the pipe length of the same length.
2. The structure is simple, small in size and light in weight.
3. It is compact and reliable. At present, the sealing surface material of the ball valve is widely used in plastic and has good sealing performance. It has also been widely used in vacuum systems.
4. The operation is convenient, the opening and closing is rapid, and the rotation is 90° from full opening to full closing, which is convenient for long-distance control.
5. The maintenance is convenient, the ball valve has a simple structure, and the sealing ring is generally movable, and the disassembly and replacement are relatively convenient.
6. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium does not cause erosion of the sealing surface of the valve.
7. Wide range of applications, from small to a few millimeters, up to a few meters, from high vacuum to high pressure can be applied. When the ball is rotated 90 degrees, all the spheres should appear at the entrance and exit, thus cutting off the flow.
Insulation ball valve is a relatively new type of ball valve. It has some unique features unique to its structure. For example, the switch has no friction, the seal is not easy to wear, and the opening and closing torque is small. This reduces the size of the actuators that are supplied. With multi-turn electric actuators, the medium can be adjusted and tightly closed. It is widely used in petroleum, chemical, urban water supply and drainage and other conditions that require strict cutting.
Characteristics
1. Open and close without friction. This feature completely solves the problem that the traditional [wiki] valve [/wiki] affects the seal due to friction between the sealing faces.
2. Top-loading structure. The valve installed on the pipeline can be directly inspected and repaired online, which can effectively reduce the parking of the device and reduce the cost.
3. Single seat design. It eliminates the problem that the cavity medium in the valve affects the safety of use due to abnormal boosting.
4. Low torque design. The specially designed valve stem can be easily opened and closed with a small handle.
5. Wedge seal structure. The valve is based on the mechanical force provided by the valve stem, and the ball wedge is pressed onto the valve seat to seal, so that the sealing property of the valve is not affected by the change of the pressure difference of the pipeline, and the sealing performance is reliably guaranteed under various working conditions.
6. Self-cleaning structure of the sealing surface. When the ball is tilted away from the valve seat, the fluid in the pipeline passes through the spherical sealing surface at 360°, which not only eliminates the high-speed fluid scouring on the valve seat, but also washes away the accumulation on the sealing surface to achieve self-cleaning. .
Stud Triac is developed on the basis of common thyristors. It can not only replace two thyristors with reverse polarity in parallel, but also requires only one trigger circuit and is an ideal AC switch device. . Its English name TRIAC is the meaning of the triac.
China leading manufacturers and suppliers of Stud Triac,Ir Stud Triac, and we are specialize in Stud Type Triac,Sc108 Data Triac Stud, etc.
Stud Triac,Ir Stud Triac,Stud Type Triac,Sc108 Data Triac Stud
YANGZHOU POSITIONING TECH CO., LTD. , https://www.cnchipmicro.com