Detailed Images
1)  Using high quality Episatr SMD LED as light source.
2)Â Â No Mercury, no UV or IR radiation, EMI free.
3)  Instant start, gentle light, no shadow, no flickering, eye-protective.
4)  High light efficiency, low power consumption, effectively saving energy cost.
5)Â High power factor(>0.95), completely conform to the requirements of state power grid.
6)  High CRI>80, vivid color rendering.
7)  Energy efficient, 95% energy saving compared with traditional CFL grille light.
8)Â Â Long life span, more than 80,000 hours, >5 years using, greatly reduce the cost of
     light source replacement and maintenance.
9)Â Â Good adaptability, easy installation, can completely replace traditional grille light.
Advantages
1)Â Â CE, RoHs, CCC, PSE, BIS certified.
2)Â Â Low power consumption, high luminous efficiency and energy saving.
3)Â Â Easy to install and use.
4)Â Â High efficiency, high accuracy, and long-life constant current ICÂ Â Â
     driver LED power supply, the efficiency can reach as high as 95%.
5)  No risk of mercury emission, environmental protection.
6)Â Â High heat conductivity, low luminous decay, pure light color and no ghosting.
7)  Integrative design for heat sink and housing. The heat is removed through the heat dissipation wing.
6)Â Â The surface is passed through anodic oxidation treatm 8w led bulb light ent.
About us
Â
Contact
Â
Detailed Images
1)  Using high quality Episatr SMD LED as light source.
2)Â Â No Mercury, no UV or IR radiation, EMI free.
3)  Instant start, gentle light, no shadow, no flickering, eye-protective.
4)  High light efficiency, low power consumption, effectively saving energy cost.
5)Â High power factor(>0.95), completely conform to the requirements of state power grid.
6)  High CRI>80, vivid color rendering.
7)  Energy efficient, 95% energy saving compared with traditional CFL grille light.
8)Â Â Long life span, more than 80,000 hours, >5 years using, greatly reduce the cost of
     light source replacement and maintenance.
9)Â Â Good adaptability, easy installation, can completely replace traditional grille light.
Advantages
1)Â Â CE, RoHs, CCC, PSE, BIS certified.
2)Â Â Low power consumption, high luminous efficiency and energy saving.
3)Â Â Easy to install and use.
4)Â Â High efficiency, high accuracy, and long-life constant current ICÂ Â Â
     driver LED power supply, the efficiency can reach as high as 95%.
5)  No risk of mercury emission, environmental protection.
6)Â Â High heat conductivity, low luminous decay, pure light color and no ghosting.
7)  Integrative design for heat sink and housing. The heat is removed through the heat dissipation wing.
6)Â Â The surface is passed through anodic oxidation treatm 8w led bulb light ent.
About us
Â
Contact
Â
0.8mm Pin Header
Antenk 0.8mm Pitch Male Header series is a fine pitch, low profile, single/dual/three/four row, PCB mounted connector set intended for limited space applications or where total weight is a factor. Our specially tooled insulators and contacts maintain consistent high quality through our automated production processes. Each series is available in thru-hole PCB or SMT mounting and plated tin, gold or selective gold as specified.
0.8mm Pin Header Options
Number of Rows
1/Single
2/Double
3/Three
4/Quad
Number of Positions
2 Position
3 Position
4 Position
5 Position
6 Position
8 Position
10 Position
12 Position
14 Position
15 Position
16 Position
17 Position
20 Position
Termination Style
SMD/SMT
Through Hole
Mounting Angle
Right Angle
Straight
0.8mm Pin Header Specifications:
Material: Standard Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Plating:
U = Gold over nickel underplate
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall.
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
Temperature Ratings: Operating temperature: -40°C to +105°C
Max process temp: 230°C for 30 ~ 60 seconds (260°C for 10 seconds)
Soldering process temperature: 260°C
Packaging:
Anti-ESD plastic bags or tubes
Approvals and Certifications:
UL Recognized File no. E224053
Pin Header,0.8Mm Male Header,0.8Mm Pin Header,0.8Mm Male Header Pins,0.8mm Pitch Pin Header,SMT 0.8mm Pin Header, THT 0.8mm Pin Header
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkelec.com