Isolated power supply made by two step-down transformers

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
TP-IP4220CZ6 5V 0.35PF breakdown voltage 6V SOT
Shunuo varistor / ESD varistor / product complete / Sunlord first-class agent
MOS power IC full range

When it is necessary to use the commercial power for electronic experiments, it is best to use a 1:1 power frequency transformer as an isolated power supply, so that no matter which wire the human body touches alone, there is no danger of electric shock. Because of the role of the 1:1 transformer, the power supply is isolated from the mains, and there is no current loop in the earth. Only touching a wire will not cause electric shock unless it touches two power cables at the same time.
Then in the hands of electronic enthusiasts, there may not be a 1:1 power frequency transformer to do isolated power supply? There is a way! Ordinary step-down transformers definitely have it? For example, primary 220V, secondary 12V, with two such transformers, connect their secondary 12V terminals, the primary of one transformer is connected to the mains, and the primary output of the other is the isolated power supply. As shown below:

The first transformer first reduces the mains to 12V, and the second transformer boosts 12V to 220V. The two transformers must have the same step-down ratio to output the same voltage as the mains. Transformer power is also best, and their power determines the power of the output power. If the power of the two transformers is not the same, the power is output at a low power.

High-voltage Submersible Motor Winding Wire

This products is made of solid copper wire conductor, crossed-linked polyethylene insulation, optional shielding layer, polyamid jacket. It has fine performance for water-resistant, mechanical, electric conducting and acid-alkali-salt resistance. It used to all types water-filled submersible motor, oil-filled high-voltage submersible motor or similar working electronics, and applied to standard of environmental-friendly.

The product can be used for Voltage 1140V, 3000V, 6000V, 10KV temperature -40℃-90℃, water pressure 1.5MPa, light acid-alkali-salt media or oil-media, for long time use with stable liability.

High-Voltage Submersible Motor Winding Wire,Filled Water Submersible Motor Wire,6Kv Submersible Motor Winding Wire,10Kv Submersible Motor Winding Wire

HEBEI GUOQIAN WIRES CO., LTD , https://www.guoqianwires.com

This entry was posted in on